Time doesn’t pass without a trace of buildup in the sewer pipes, which is manifested from the deposits of waste in them. Because of this, the properties and characteristics of the movement in the drain determines how fast they will appear. Due to the presence of these layers on the walls, the pipes acquire a smaller cross-section. This leads to a reduction in capacity and clogging of sewerage. In addition to this, due to sediment, there are difficulties with drainage. It turns into a favorable environment for sulfate-reducing bacteria, which are actively multiplying in it. At the same time, products that are not disposable exert a negative influence on the pipes, creating more clogging.
Prevention of blockages
Among the possible methods for preventing sewage sludge, there is no equal in reliability with the use of plugs-filters placed on drainage holes, and carrying out preventive measures that involve washing it.
The necessary effect can be achieved if weekly drain holes are cleaned with a cup of baking soda followed by vinegar. Once foam begins to develop in the pipe, pour hot water down the drain to clear it out.
Determine the clog
In the event of blockages, the order of actions is determined by the specific nature of the clogging.
If water cannot escape through the drain hole in only one plumbing device, it is clear that the resulting clogging has a local character.
If a similar pattern is observed with all plumbing fixtures, then it is likely that the main pipe has been clogged.
Elimination of local sewerage clogging
You can also clear a blockage by pouring boiling water down the drain. With this method, you can easily remove fat deposits.
An alternative solution may be to remove the siphon, whose main task is to filter the suspended particles, and clean it. In the course of dismantling it, it’s important to do everything very carefully and make sure that all the parts remain in place and are intact.
If this attempt isn’t success, it makes sense to resort to chemical preparations for cleaning the sewage system. Most of the cleaners contain the main active component – alkali. With the help of such cleaners, you can remove fat deposits.
If there is a suspicion that the sewerage is clogged because of a buildup of hair, then an acidic cleaner will help here. It is inadmissible to pour any of these preparations into the pipe when there is a serious clog. If the drain does not allow to the cleaner to go down into the drain, there is a risk that the cleaner can spill back, causing a burn.
It should be remembered that a simple plunger can be useful for fighting against clogs. To make it easier to deal with the clogs, it’s recommended that you apply a layer of Vaseline or other thick lubricants to the edges of the plunger and then start cleaning the sewer.
It is important that the whole cup is immersed in water. When placing it on the drain hole, first remove air from the bowl.
How do you handle the problem if all means were powerless when clearing the clog? In this case, there can be only one way out – use a plumbing cable. One end of this device provides a handle, and the other – a tip, made in the form of a drill or brush.
Figure 2: The plumbing cable
Cables are often used by professionals, and to achieve the desired results, you must have certain skills to work with it. It can bypass the curves of the pipe, but it’s important to understand that they can damage plastic piping. If you doubt whether you will be able to handle the blockages, or you do not have a cable, it is recommended to have a plumber do the work.
Elimination of blockages of main pipes
In principle, similar methods are used here to combat blockages. At the heart of industrial sewage pumping is the use of high pressure and temperature. Drainage cannot be a good reason for panic. With such a mood, people act rashly, as a result of it all ends with even greater problems.
Thats what ccp.services can recommend you!